Table of Contents
Advertisement
Windows PCL
1.
In the driver's [Setup] tab, recall any saved [driver
settings] you may wish to use.
2.
Choose [Booklet] from the [Finishing Mode] drop-down
list, then click [Options].
3.
In the Options window you can set the [signature] size,
the number of [pages] per side of paper and the [binding
margin] if your document is going to be thick. The graphic
in this window shows the effect of each choice you make.
Note
If the Booklet choice is not shown, check that the
Duplex option is enabled in the driver.
the driver device options" on page
A guide to printing > 215
PCL Booklets_oda.jpg
(See "Setting
184.)
Advertisement
Table of Contents
