Table of Contents
Advertisement
Printer collate—This section describes the collate function built
into the printer driver. In this case the job is stored temporarily
in MFP memory or on the MFP's hard disk (if installed), and the
MFP performs collation. This method is normally faster, but may
not work from all applications.
If you experience problems using MFP collate, use the collate
option in your application's print options instead.
1.
If using the PCL driver, on the [Setup] tab first choose any
saved [driver settings] that you wish to use.
"Recalling saved driver settings" on page 184.
2.
In the [Job Options] tab, choose how many [copies] you
want to print from the scrolling list.
3.
Click the [Collate] checkbox.
A guide to printing > 217
See
PS Collating_oda.jpg
Advertisement
Table of Contents
