Table of Contents
Advertisement
This feature allows print jobs to be created on the PC and stored
on the MFP's hard disk for printing on demand. This is good for
forms, generic memos, letterhead, stationery, etc.
If you use this feature for standard forms, for example, you can
walk up to the MFP at any time and print off your forms without
having to re-send them from the PC.
The document is not automatically deleted from the MFP's hard
disk after printing. It remains there for future use until you delete
it from the printer control panel or from your PC with the Storage
Device Manager utility.
Note
If this choice does not appear in the driver screens, or
if it is grayed out, check to ensure that the hard disk is
enabled in the printer driver.
printer drivers" on page
There are three parts in job spooling:
1.
Sending the document. See "Sending the document" on
page 76.
2.
Printing the document. See "Printing the document" on
page 78.
3.
Deleting a stored document. See "Deleting a stored
document" on page 79.
S
ENDING THE DOCUMENT
1.
If using the PCL driver, in the [Setup] tab choose any
saved driver settings you wish to use.
saved driver settings" on page 184.
2.
In the driver's [Job Options] tab, click [Store to HDD].
147.)
Print settings and security > 76
(See "Adjusting windows
See "Recalling
Advertisement
Table of Contents
