Table of Contents
Advertisement
M
ULTI PURPOSE TRAY
1.
Open the multi purpose tray and press gently down on the
paper platform (1) to ensure it is latched down.
2.
Load the paper and adjust the paper guides (2) to the size
of paper being used.
>
When printing on headed paper load the paper into the
multi purpose tray with pre-printed side up and top
edge into the MFP.
>
Envelopes should be loaded face up with top edge to
the left and short edge into the MFP.
>
Do not exceed the paper capacity of about 50 sheets or
10 envelopes. Maximum stacking depth is 0.3937
inches (10mm).
3.
Press the tray latch button (3) inwards to release the
paper platform, so that the paper is lifted and gripped in
place.
Note
Before closing the multi purpose tray, paper platform
(1) must be latched down.
4.
Set the correct paper size for the multi purpose tray in
either the Media Menu (printer menu settings) or Print
Menu (scanner menu settings). See
page 34
for details.
Loading paper > 27
1
"Configuration" on
Advertisement
Table of Contents
