Crestron TPMC-8L Quick Manual page 35

NET
This 4-position mini-terminal block connector provides Cresnet network connection
from the touchpanel as well as power to the touchpanel.
 Pins 24 and G provide 24 VDC and ground.
 Pins Y and Z provide communications (data)
MIC OUT
This 3-position mini-terminal block connector provides balanced line level microphone
output with AGC.
PIN #
AUDIO INPUT
One 5-pin 3.5mm detachable terminal block Balanced/unbalanced stereo (summed
to mono) line-level input (requires SPK-6L); Input Impedance: 10k ohms balanced,
5k ohms unbalanced; Maximum Input Level: 2 V
connects to a Crestron CAT5 balanced audio source via CresCAT cable; Maximum
CAT5 Cable Length: 1000 feet.
PIN #
Balanced
Input
Shield
Source 1
Source 2
Doc. 4903B
Crestron Quick Guide to Touchpanel Connections
DESIGNATION
1 +
2 -
3 S
DESIGNATION
1 R+
2 R -
3 S
4 L+
5 L -
1 2
+ - + -
G
+
+
DESCRIPTION
Mic Output (Positive)
Mic Output (Negative)
Shield
balanced/unbalanced; Normally
rms
DESCRIPTION
Right Input (Positive)
Right Input (Negative)
Shield
Left Input (Positive)
Left Input (Negative)
Unbalanced
Input
1 2
+ - + -
G
+
Source 1
Shield
+
Source 2
Shield
NET
24 Y Z G
Jumpers
31