• Can be charged when TPMC-8X is mounted in the TPMC-8X-DS Docking Station/Charger (sold separately) NOTE: For more information on the TPMC-8X touchpanel, refer to the latest version of the TPMC-8X Isys i/O™ Touchpanel Operations Guide (Doc. 6539), which is available from the Crestron website (http://www.crestron.com/manuals).
Internal Battery Pack for TPMC-8X Specifications Specifications for the TPMC-8X-BTP are listed in the following table. TPMC-8X-BTP Specifications SPECIFICATION Battery (6502269) Output Voltage Capacity Battery (6501482) Output Voltage Capacity Composition Charging time Weight Physical Description The TPMC-8X-BTP has a multi-pin connector for attachment inside the battery compartment of the TPMC-8X.
Crestron TPMC-8X-BTP Industry Compliance As of the date of manufacture the TPMC-8X-BTP has been tested and found to comply with specifications for CE marking and standards per EMC and Radiocommunications Compliance Labelling. Handling NOTE: The TPMC-8X-BTP contains a Lithium Ion (Li-Ion) battery.
Installation Use the following procedure to install the TPMC-8X-BTP in a TPMC-8X touchpanel: 1. Place the touchpanel screen-side down on a clean, soft surface. 2. Remove the two Phillips head screws that hold the internal battery compartment cover on the rear of the touchpanel.
Page 9
TPMC-8X-BTP in Battery Compartment of TPMC-8X NOTE: To prevent battery drain during shipment or for long-term storage, the TPMC-8X has a battery switch inside the battery compartment. To use the internal battery, move the switch to the up (on) position. To conserve battery power when the unit will not be used for extended periods, move the switch to the down (off) position.
3. Using the flat end of a small slot head screwdriver, gently pry the multi-pin connector off the corresponding connector in the battery compartment of the TPMC-8X. 4. With the multi-pin connector detached from the TPMC-8X, lift the TPMC-8X-BTP out of the battery compartment. 6 • Internal Battery Pack: TPMC-8X-BTP Crestron TPMC-8X-BTP Operations &...
Future Updates As Crestron improves functions, adds new features and extends the capabilities of the TPMC-8X-BTP, additional information may be made available as manual updates. These updates are solely electronic and serve as intermediary supplements prior to the release of a complete technical documentation revision.
All brand names, product names and trademarks are the sole property of their respective owners. Windows is a registered trademark of Microsoft Corporation. Windows95/98/Me/XP/Vista and WindowsNT/2000 are trademarks of Microsoft Corporation. 8 • Internal Battery Pack: TPMC-8X-BTP Crestron TPMC-8X-BTP Operations & Installation Guide – DOC. 6556A...
Page 13
Crestron TPMC-8X-BTP Internal Battery Pack for TPMC-8X This page is intentionally left blank. Internal Battery Pack: TPMC-8X-BTP • 9 Operations & Installation Guide – DOC. 6556A...
Page 14
Internal Battery Pack for TPMC-8X Crestron TPMC-8X-BTP This page is intentionally left blank. 10 • Internal Battery Pack: TPMC-8X-BTP Operations & Installation Guide – DOC. 6556A...
Page 15
Crestron TPMC-8X-BTP Internal Battery Pack for TPMC-8X This page is intentionally left blank. Internal Battery Pack: TPMC-8X-BTP • 11 Operations & Installation Guide – DOC. 6556A...
Need help?
Do you have a question about the TPMC-8X and is the answer not in the manual?
Questions and answers