Saving The Program List On Hard Disk - JVC GV-DS2 Instructions Manual

JLIP VIDEO PRODUCER
File File Edit Set-up Window Help
New Ctrl+N
Drop
COUNTER 00:00:00:09F
Open Ctrl+O
POWER
ON OFF MEMO
Save Ctrl+S
Save As... Ctrl+A
PROGRAM PLAYBACK
SCENE
Exit
SCENE CUT IN CUT OUT
01 00:05:00:25 00:06:04:16
02 00:06:10:26 00:07:30:15
03 00:07:33:29 00:08:45:15
04 00:08:51:05 00:10:13:26
ELAPSED TIME
00:04:57:17F
Save a program list
FILE NAME DIRECTORY
travel c: \
DRIVE
MEMO
Europe Tour
ID 06 FILE
START
BF
BF
B W
EC
IN/OUT
jlip
tape
c:
OK
CANCEL

Saving the program list on hard disk

It is possible to save all programmed scene
information as a file in the computer.
START SAVING
1
Select "Save As" from "File" on the JLIP
VIDEO PRODUCER window.
•The "Save a program list" dialog box
WF
appears.
B
W
ENTER FILE NAME
2
TC
Input a file name (up to 8 characters) in
the "FILE NAME" field.
•The extension is jlp. ex.: travel.jlp
•You can also input a comment (up to
30 characters) in the "MEMO" field.
SAVE FILE
3
Click "OK" and the file will be saved on
the hard disk which is in use.
NOTE:
The programmed scene information that is
saved includes only the counter reading at
the IN/OUT point, the Fade/Wipe Effect and
the P.AE/Effect. The image is not be saved.
Saving the program list on a floppy disk
Prepare floppy disk by creating a directory
named "JLIP" and subdirectory named "tape"
beforehand.
SELECT FLOPPY DISK DRIVE
1
Click
OPEN SUBDIRECTORY
2
Click "tape" in the "DIRECTORY".
SAVE FILE
3
Click "OK".
NOTE:
If the JLIP VIDEO PRODUCER window is
closed before saving the file, the file will not
be saved. So, save the file before closing the
JLIP VIDEO PRODUCER window if you wish
to keep it.
in "DRIVE".
55
EN