JVC GV-DS2 Instructions Manual page 27

Set-up
Capture Mode
Image Format
Device Change
Pre-roll
Initialize
ID Change
Counter Reset
Window
Arrange Index
VCR
[VCR] operation window
VCR POWER button
FF/FF Search button
REW/REW Search button
Help
Contents
About JLIP Video Capture
NOTE : Counter reset
If you use a DV-format digital camcorder, counter information is represented by the
time code written on the tape. Counter reset is not possible.
Two different modes available: Step by Step Capture and Automatic Capture
( pg. 29, 30, 32).
Selects image data format to be used in the transfer and capture mode
( pg. 33).
To initialize a connected unit or to change a connected unit (
Adjusts the Preroll time of the playback VCR. When Auto Capture is
performed with no Preroll time selected, "Pre-roll" is automatically set to
"Standard". If the captured image appears disturbed when Auto Capture is
used, select "Long" instead (
Initialize when changing a COM port or transfer rate (
Changes the Video Capture unit's ID number (
Resets the VCR's counter (
Deletes space when an index image has been deleted (
The VCR operation window appears to allow the computer to operate the
VCR.
Counter display
VCR
I
00:01:23:12F
PLAY button
STOP button
Display Help menu
F1
Display version information of this software.
pg. 54).
pg. 34).
Capture
Transfer
Forward Slow button
PAUSE button
EN
pg. 23).
pg. 22).
pg. 35).
pg. 35).
Reverse Slow button
Capture button
Transfer button
27