Step By Step Capture - JVC GV-DS2 Instructions Manual

STEP BY STEP CAPTURE

Use the Step by Step Capture mode when you want to:
•Capture a smaller number of images.
•Confirm the images being captured.
Set-up
Capture Mode
Image Format
Device Change
Pre-roll
Initialize
ID Change
Counter Reset
JLIP Video Capture
File Edit Set-up Window
CAPTURE TRANSFER
NOTES:
•Index image/Full image data are
transferred to the image display boxes
bordered in green. Click and select the
desired box(es).
•When transferring full image data using
the Bitmap image format (
transfer takes a very long time, causing
the video source unit to stop playback
automatically.
Step by Step
Automatic
9
.bmp), the
Preparation
•Make sure all units are properly connected
( pg. 14).
•Click "Image Format" in "Set-up" and
select the desired format (
1
Open the menu bar and click "Set-up"
— "Capture Mode" — "Step by Step".
•The Step by Step Mode is entered.
2
Click "CAPTURE" on the image you
want to capture.
•Click "Window" — "VCR" to have the
VCR scan the picture in the VCR
Operate window (
•When you press the CAPTURE button,
full image data (640 x 480 pixels) is
captured into the Video Capture
Docking Station memory. Index image
data (80 x 60 pixels) is simultaneously
transferred to the computer.
3
Index image data is transferred to the
computer.
•The message "No.1 index image being
transferred" appears during data
transfer.
4
The message "Transfer the full image ?
Yes/No" appears. Click "Yes". Full
image data (640 x 480 pixels) is
transferred to the computer.
•You cannot use the TRANSFER button
in Step by Step Transfer mode.
5
The full image data is transferred to the
computer.
•The message "No.1 image being
transferred" appears during data
transfer.
6
Repeat steps 2 through 5 as required.
29
EN
pg. 33).
pg. 27).