Picture Format Setting Selecting A Picture Format; Picture Format Setting; Picture Format Setting; Selecting A Picture Format - JVC GV-DS2 Instructions Manual

PICTURE FORMAT SETTING

SELECTING A PICTURE FORMAT

Under "Image Format", you can specify the full image data format and the capture mode.
1
Open the menu bar
and click "Set-up"
— "Image Format".
•The "Image
Format" window
appears.
2
Select format.
•There are two different settings avail-
9
able: "JPEG (
9
( . bmp)". Refer to "Picture Data
Format" below for details.
TRANSFER DATA
Full image data can be captured and transferred in two different formats.
Picture Data Format
9
JPEG ( . jpg)
• This is the default setting. If you do not set Picture Format, image data is captured in this
format.
• JPEG (Joint Photographic Expert Group) is a leading standard defining the compression and
decompression of still color pictures.
• The quantity of transferred data appears smaller because the images are compressed. This
results in a shorter transfer time.
9
Bitmap ( . bmp)
• Transfer time is longer when you use this format because there is no data compression. The
benefit is that picture quality is maintained with no deterioration.
• Bitmap is a data format representing characters and graphics with combinations of pixels.
Full image data resolution is 640 x 480 pixels with 16.77 million colors (24-bit color).
Index image data resolution is 80 x 60 pixels with 16.77 million colors (24-bit color).
Capture Mode
Frame Picture
• This is the default setting. If you do not set Picture Format, images are captured in this
mode.
• Since a frame consists of two overlapping 1/60 sec. images (one 1/30 sec. image forms a
field), it is unstable when capturing fast-moving motion pictures.
Field Picture
• While a field contains only half the data of a frame — meaning that vertical resolution is
half that of a frame — images captured from a fast-moving motion picture are more stable
than when captured with "Frame Picture".
Set-up
Capture Mode
Image Format
Device Change
Pre-roll
Initialize
ID Change
Counter Reset
. jpg)" and "Bitmap
3
Select capture mode.
•There are two different settings avail-
able: "Frame Picture" and "Field
Picture". Refer to "Capture Mode"
below for details.
4
Click "OK".
•This completes picture format setting.
•This setting takes effect the next time
you use the capture function.
33
EN