JVC GV-DS2 Instructions Manual page 11

Two software programs are provided.
JLIP Video Capture Software
( pg. 14 – 43)
JLIP Video Capture Software
This is the software described in this manual.
Video Capture Facility
Video images from video source units such as
camcorders or VCRs can be captured as 640
x 480 still images with 16.77 million colors
through the serial port (RS-232C) of a
Windows -operated computer.
JLIP Control Facility
With a JLIP compatible camcorder or VCR,
• all basic video operations can be
executed via the computer display;
• up to 99 images can be captured
automatically with Program Video
Capture (playing tape — scanning —
transferring to PC)
Data Sharing With JLIP Video
Producer Software
Data can be imported from the JLIP Video
Producer Software.
Data from the Video Capture Software can
also be exported to the Video Producer
Software for Program Playback or Assemble
Editing.
JLIP Video Producer Software
( pg. 14, 45 – 71)
JLIP Control Facility
With a JLIP-compatible camcorder, VCR or
video printer (GV-PT1U, GV-PT2U):
• all basic video operations can be
executed on the computer display;
• allows programmed video playback (up
to 99 programs) or assemble editing
• allows image adjustment on the GV-
PT1U video printer
• print command can be issued to the GV-
PT2U video printer
Data Sharing with the Video Capture
Software
Video Capture Software data can be exported
to the Video Producer Software.
Assemble Editing
Selected scenes on a pre-recorded tape can
be edited in a specified sequence.
Pre-recorded tape
(on camcorder)
Recording tape
(on VCR)
11
EN