Basic Operations; Operating Camcorder; Setting In/Out Points - JVC GV-DS2 Instructions Manual

52
EN

Operating camcorder

PREPARE CAMCORDER
1
Set the camcorder's Power Dial to
"PLAY" and insert a recorded tape into
the camcorder.
2
PLAYBACK ON TV MONITOR
Click .
•Playback picture appears on the TV
monitor.
•To confirm other operations, click other
buttons.

BASIC OPERATIONS

Setting in/out points

PLAYBACK ON TV MONITOR
1
Click . Playback picture appears on the
TV monitor.
SET CUT IN/OUT POINTS
2
Select "Function Set" from "Set-up" in
the JLIP VIDEO PRODUCER window and
select "Edit Tape".
To set CUT IN/OUT points, click IN/OUT
button at the beginning and end of the
scene you want to dub.
•Set CUT IN/OUT points so that the
CUT OUT point's value is larger than
the CUT IN point's.
•A scene with no CUT OUT point will
disable program playback and dubbing.
•If you set CUT IN point at the
beginning of the tape or if you set CUT
OUT point at the end of the tape,
editing may not function properly.
Change previously registered CUT IN/
OUT points slightly and try setting
them again.
•When connecting to a VHS-C
camcorder, rewind the tape to its
beginning and press COUNTER RESET
on the camcorder (
•The counters of DV-format digital
camcorders cannot be reset.
JLIP VIDEO PRODUCER
File Edit Set-up Window Help
Drop
COUNTER 00:00:00:09F
POWER
ON OFF MEMO
PROGRAM PLAYBACK SCENE
SCENE CUT IN
01 00:05:00:25 00:06:04:16
02 00:06:10:26 00:07:30:15
03 00:07:33:29 00:08:45:15
04 00:08:51:05 00:10:13:26
ELAPSED TIME
pg. 69).
ID 06 FILE
START
BF
CUT OUT
BF
B W
EC
00:04:57:17F
IN/OUT
WF
B
W
TC