Jlip Video Producer Software; Using Jlip Video Producer Software Data - JVC GV-DS2 Instructions Manual

38
EN

USING JLIP VIDEO PRODUCER SOFTWARE DATA

The Video Capture Docking Station can capture JLIP Video Producer software data at an edit-in
point corresponding to a preset counter number.
File
New Album
Open Album
Save Album
Open JLIP (jlp) File
Save As JLIP (jlp) File
Save Image As...
Exit

JLIP VIDEO PRODUCER SOFTWARE

Preparation
•Make sure all units are properly connected
•Insert the tape program edited with the
•If the data is stored on a floppy disk, load
1
Ctrl+N
Ctrl+O
Ctrl+S
2
Ctrl+A
3
4
5
6
7
( pg. 14).
Video Producer Software into the video
source unit.
disk into the floppy disk drive.
Open the menu bar and click "File" —
"Open JLIP (jlp) File".
•The "Open JLIP (jlp) File" window is
displayed.
Double-click the name of the desired
folder (directory) in the Select Directory
box.
•If the data is stored on a floppy disk,
enter the drive name.
Click on the file name to select it.
Click "OK".
•The computer monitor displays Scene
No., counter number at Edit-in Point,
and a blank image box.
Open the menu bar and click "Set-up"
— "Capture Mode" — "Automatic".
Select the data you want to transfer and
"Program Capture" and click "OK".
Click the "TRANSFER" button.
•The image data scanned by the video
source unit is automatically transferred
to your computer.