Storing Frequencies Found During A Search; Programming Search Ranges - Radio Shack 20-162 User Manual

Searching
3. Press
4. When the scanner stops on a transmission,
quickly press PSE to stop searching and listen
to the transmission. SR6 PAUSE appears. To step
through the frequencies during search Pause
Mode, press
5. To release the hold and continue searching,
press PSE.

Storing Frequencies Found During a Search

To store frequencies you find in a search.
1. Press FUNC + ENT/PGM when you find a
frequency.
2. Press
3. Press ENT/PGM. The frequency you want to
store, the smallest empty channel number,
and "0.0000" are displayed.
4. Press ENT/PGM to enter the frequency. After
programming, "Edit Ch Memory?" appears. Press
ENT/PGM to go to Programming Mode, or
press CL to go back to a previous mode.

Programming Search Ranges

To define the search range for each search bank
during a chain search:
1. From Manual Mode, press ENT/PGM to put
the scanner in Programming Mode.
2. Press SRCH to go to Programming Search
Bank Mode.
to search down or
or .
or to select a bank.
22
to search up.