And Europe Only) - Kenwood VR-605 Instruction Manual

Listeninn to radio broadcasts
Presetting
The RDS auto memory functron assrgns preset numbers to RDS
stations starting from preset number "1"
Jherefore, be sure to
execute the RDS auto (memory functron before usrng the followng
operaptions to manually store AM statrons and other FM statrons, and
RDS statrons
See "Presettrng RDS statrons (RDS AUTO MEMORY)" (For the U K
and Europe only)
-2%
MEMORY
MULTI CONTROL
a Tune to the station you want to store.
a Press the MEMORY key while receiving the station.
Blinks for 5 seconds
Lights for 5 seconds
El within 5 seconds.
I
(If more than 5 seconds elapse, press the MEMORY key agam).
q
Use the MULTI CONTROL knob to select one of the station
presets (1 - 40).
q
Press the MEMORY key again to confirm the setting.
l
Repeat steps 8, 8, El, and B to store as many statrons as
necessary
l
If you store a statroll at a prevrously used preset, the previous statron
WIII be replaced by the Inew one
Numeric keys
q
Enter the number of the preset station you want to receive
(up to "40").
Press the numeric keys in the following order:
For "15". press . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [~],I~/
For "20". press . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1~1,1~1,1~/
l
If you make a mrstake entering a two drgrt number, press the +lO
key repeatedly to return to the orrgrnal display and start agarn.
a Press the TUNER key to select tuner as the source.
m Use the P.CALL I-/W key to select the desired station.
l
Each time you press the key, another preset statron IS recerved rn
order
Pressing the P.CALL w does the following :
01 - 02 --L 03 - .., --, _.. -t 38 - 39 - 40
Pressing the P.CALL IW+ does the following :
01 + 02 + 03 - + ,,, 38 .- 39 + 40
Holding down the WI or 1-4 key, lets you skip through the
presets, receiving each preset station at 0.5 second intervals.
n Press the TUNER key to select tuner as the source.
23 EN