Download  Print this page

Surround Modes - Kenwood VR-605 Instruction Manual

Audio video surround receiver
Hide thumbs

Advertisement

Normal pla yback
SPEAKERS ON/OFF
VOLUME CONTROL
I CINEFA EQ
I
PHbNES
MULTI CdNTROL
--
M:TE
BASS BOOST
MUTE
LOUDNESS
& .,>vy.-
/,_
-a
,*:,~;*J,:<-
la
II
"
.
'.
Adjusting tha TONE (remote control only)
You can adjust the sound quaky when the receiver is in the PCM stereo
and analog stereo mode.
0 Press the TONE key to select the TONE mode.
0 Use the MULTI CONTROL knob or keys to select TONE ON/OFF.
Q Press the TONE key for the following
displays.
C
0 TONE
: Tone setting mode is ON.
@ BASS
: Select this to adjust the low frequency range.
@I TREB
: Select thus to adjust the high frequency range
@ Use the MULTI CONTROL knob or keys to adjust the sound
quality.
l
The bass and treble levels are adjustable from -10 to +I 0 In 2 step
increments.
*The adjustment item is displayed for approximately 8 seconds.
l
If CINEMA EQ is turned ON, TONE function wrll not be avarlable.
Once-touch low frequency emphasis (BASS BOOST)
(remote control only)
You can adjust the sound quality when the receiver is rn the PCM stereo
and analog stereo modes.
Press the BASS BOOST key.
l
Press the key once to select the maxrmum (+I01 low frequency
emphasis setting.
l
TONE will automatrcally be turned ON.
l
Thus key does not function when the receiver IS in the sound quality
or ambience effects adjustment mode.
Switching back the previous setting
Press the BASS BOOST key again.
,_
'.,'
1,,,,
Adjusting the LOUDNESS mode (remote control only)
You can adjust the Loudness functron whrch controls the low volume
settings to marntarn the musrc's rrchness The adjustment can be made
when the receiver is in the PCM stereo and analog stereo mode.
Press the LOUDNESS key to turn the LOUDNESS setting ON.
To cancel
Press the LOUDNESS key again so that the "LOUDNESS"
indica-
tor goes off.
Muting the sound
The MUTE key lets you mute the sound of the speakers.
Press the MUTE key.
To cancel
Press the MUTE key again so that the "MUTE"
indicator goes off.
l
MUTE ON can also be deactivated by turning the volume control
knob.
,. ,
CINEMA EQ mode
You can enjoy a more rmpressrve sound effect when you swatch
CINEMA EQ ON during Dolby Dlgrtal and DTS playback.
Press the CINEMA EQ key.
"CINEMA EQ" will scroll across the drsplay
l
When CINEMA EQ is turned ON, subwoofer remix's functron will
also be effectrve.
l
If REC MODE is ON or TREBLE's level IS -6 or below, CINEMA EQ
function will not be available.
To cancel
Press the CINEMA
ECI key again so that the "CINEMA
EQ"
indicator
goes off and displays "OFF".
l
When CINEMA EQ IS turned OFF, the settrng will remain until the
next selectron is made.
,,
listening with headphones
0 Press the SPEAKERS ON/OFF key so that the speaker indicator
goes off.
Make sure the SP rndrcator is turned OFF
p
zy
l
If you turn off all of the speakers when rn surround mode, the
surround mode wrll be canceled as well, resultrng in stereo play-
back.
0 Connect headphones
to the PHONES jack.
Q Usethe VOLUME CONTROL knob or VOLUME keys to adjust the
volume.
20 EN

Advertisement

Table of Contents
loading

  Also See for Kenwood VR-605

  Related Manuals for Kenwood VR-605

This manual is also suitable for:

Vr-615Krf-v5060dKrfw4060dKrfw5560dKrf-v4060dKrf-v5560d