Kenwood VR-605 Instruction Manual page 28

Ambience effects
The DTS compatible models can reproduce a CD, DVD, or LD carrying the
DTS mark.
DOLBY DIGITAL can be used when playrng DVD or LD software bearrng
the @m mark and DOLBY DIGITAL format digital broadcasts (etc.).
DOLBY PRO LOGIC can be used when playing video, DVD. or LD
software bearing the mlmnwnm4mark
LISTEN MODE
I
INPUT'MODE
INPUT SELECTOR
-
LISTEN MODE
Preparations
*Turn ON related components.
*Complete "Preparing for surround sound" (speaker settrngs) -Lx
l
Use the INPUT SELECTOR to select the component You wish to
play back with surround sound
l
Use the INPUT MODE key to select the input mode (analog or
digital) for the source You wish to play back.
-E
l
Noise wrll be produced when a DTS source IS played by selectrng the
analog input.
0 Start playing the video software.
a Press the LISTEN MODE key to select the listening mode.
The listening mode settrngs are stored separatelyforeach Input If the
input mode IS set to full auto ("AUTO DETECT" lights), the receiver
selects the optimal listening mode automatrcally based on the type of
input signal and the speaker settings
Each press of the LISTEN MODE key switches the setting as
listed below.
The listening mode settings are different depending on the type
of input signal.
When the DOLBY OlGfTAL signal is input:
(The DOLBY DIGITAL, PRO LOGIC, or STEREO Indicator lrghts up.)
I
0 DOLBY DIGITAL : DOLBY DIGITAL surround.
@ PL II MOVIE
: PRO LOGIC II surround MOVIE mode.
(The PRO LOGIC rndrcator lights up.)
3~ PL II MUSIC
: PRO LOGIC II surround MUSIC mode.
(The PRO LOGIC rndrcator lrghts up.)
4 PRO LOGIC : PRO LOGIC II surround PRO LOGIC
mode.
(The PRO LOGIC indtcator lrghts up 1
? STEREO : Normal stereo playback
When you select DOLBY DIGITAL
"DOLBY DIGITAL" wrll scroll from right to left
When the OTS signal is input:
(The DTS Indicator lights up )
[I
D DTS
: DTS surround
@ STEREO : Normal stereo playback
When the analog signal or the digital signal (except for
DOLBY DIGITAL or OTS signal) is input:
* 'i: PL II MOVIE
-,
(2' PL II MUSIC
3 PRO LOGIC
$3 ARENA
$Z JAZZ CLUB
$1 THEATER
3 STADIUM
8 DISCO
- (3 STEREO
PRO LOGIC II surround MOVIE mode
(The PRO LOGIC rndrcator lights up.)
PRO LOGIC II surround MUSIC mode
(The PRO LOGIC rndrcator lrghts up )
PRO LOGIC 11 surround PRO LOGIC mode
(The PRO LOGIC rndrcator lights up 1
DSP Surround ARENA mode.
DSP Surround JAZZ CLUB mode
DSP Surround THEATER mode
DSP Surround STADIUM mode.
DSP Surround DISCO mode.
Normal stereo playback Sound IS produced
from the two front channels only.
(The STEREO rndrcator lights up j
l
Dolby Drgrtal or DTS srgnal havrng more channels than the maxrmum
number of playback channels avarlable using the receiver's current
settings IS Input, downmrxing IS performed to match the number of
avarlable channels
Q Adjust the volume.
Notes
l
Depending on the type of the srgnal or speaker setting, some
listenrng modes cannot be selected
l
When playback IS started, the sound may be cut or Interrupted
before the Input source IS confirmed as Dolby Digital
*To enjoy Dolby Digital surround (as well as all the other lrstenrng
modes) from a srngle component, be sure to use a Dolby Drgrtal
compatible source component.
28 EN