HOW TO... REPLACE THE LIFEPULSE SENSORS
Tool required: Phillips screwdriver
Estimated repair time: 30 minutes
1. Remove the two screws that secure the Lifepulse sensors to the bullhorn.
2. Disconnect the heart rate cable from the Lifepulse sensors.
3. Reverse steps 1 and 2 to install the new Lifepulse sensors.
Phillips
Mounting
Screws (2)
Models 95L, 95LWEZ, and 95LE Summit Trainers
Lifepulse Sensor
Bullhorn
Lifepulse
Sensor
How To...
85