Troubleshoot The Lifepulse; Recycle The How To's; Sensors; Battery - Life Fitness INXS-SLXX Assembly Instructions Manual

Integrity cross-trainer
Table of Contents

Advertisement

Troubleshoot the Lifepulse

Sensors

If the heart rate reading is erratic or missing, do the following:
• Dry the hands to prevent slipping.
• Apply hands to the sensors that are set into the moving handlebars.
• Grasp the sensors firmly.
• Apply constant pressure around the sensors.
Recycle the Battery
Remove and recycle the rechargeable battery before discarding this product at the end of its useful life. Disconnect
the power supply (if applicable) before removing the battery. To access the battery remove the screws that hold the
upper rear cover to the back of the cross-trainer. The battery is located near the top of the frame, directly below the
rear shrouds that are to be removed. To remove the battery, remove the two wires connected to the battery and the
two screws that hold the battery in place. Dispose of the battery properly.
How To's
Knowledge Base
See
Knowledge Base
for more detailed information.
How to Obtain Product Service
1. Verify the symptom and review the operating instructions. The problem may be unfamiliarity with the product and
its features and workouts.
2. Locate and write down the serial number of the unit which is located on the top right of the front stabilizer.
3. Contact Life Fitness Customer Support Services at http://www.lifefitness.com.
Page 14 of 35

Advertisement

Table of Contents
loading

This manual is also suitable for:

Inxd-slxxInt-xtPf-int-xtInt-xt-csInt-xt-b1Int-xtcs-b1

Table of Contents