How To... Replace The Rear Step Assembly - Life Fitness 95L Service Manual

Models 95L, 95LWEZ, and 95LE Summit Trainers
How To...

HOW TO... REPLACE THE REAR STEP ASSEMBLY

Tools required: Phillips screwdriver, socket, extension, ratchet
Estimated repair time: 15 minutes
1. Remove the two Phillips screws that secure the bullhorn covers to the bullhorns.
2. Remove the four Torx bolts that secure the handrail assembly to the monocolumn.
3. Remove the four Torx bolts that secure the handrail assembly to vertical uprights.
4. Remove the handrail assembly.
5. Remove the three hex bolts that secure the rear step assembly to the frame.
6. Slide the rear step assembly up and off the unit via the vertical uprights.
7. Reverse steps 1 through 6 to install the new rear step assembly.
Handrail Assembly
Bullhorn Covers
Monocolumn
Rear Step
Vertical Uprights
91