Models 95L, 95LWEZ, and 95LE Summit Trainers
How To...
HOW TO... REPLACE THE POWER CONTROL BOARD
Tool required: Phillips screwdriver
Estimated repair time: 20 minutes
1. Remove the main shrouds
(see "How To..." on page
86).
2. Identify and tag wiring at
the power control board.
3. Disconnect the wiring from
the power control board.
4. Remove the four screws that
secure the power control
board to the mounting
plate.
5. Use the same screws to
install the new power
control board.
6. Connect the wiring to the
new power control board.
7. Reinstall the main shroud
assembly.
108
Mounting Plate
Screws (4),
torque to
15-20 in-lbs
(1.7-2.3 Nm)
Power Control Board