How To - Life Fitness 95L Service Manual

Models 95L, 95LWEZ, and 95LE Summit Trainers

How To...

HOW TO... REPLACE THE PEDAL TRACK COVER
Tools required: Phillips screwdriver, metric Allen set
Estimated repair time: 20 minutes
1. Remove the main shroud assembly (see
"How To..." on page 86).
2. Remove the two Allen screws that secure
the pedal track cover being replaced to the
upper track cover mounting bracket.
3. Remove the two Allen screws that secure
the upper track cover mounting bracket to
the track plate.
4. Carefully slide the upper track cover
mounting bracket and remaining cover up
until the assembly is free of the lower track
cover bracket.
5. To ease removal of the track cover, position
the corresponding pedal at the bottom of the
track.
6. Slide the track cover that is free of the
assembly up and out of the lower track cover
bracket.
7. Reverse steps 1 through 5 to install new pedal
track cover.
98
Pedal
Track
Cover
Upper Track
Cover
Mounting
Bracket
Upper Track
Cover Mounting
Bracket
Track
Plate
Left Pedal
Track Cover
Allen Screws (2),
torque to
5-7 ft-lbs
(7-10 Nm)
Allen Screws (2),
torque to
9-13 ft-lbs
(12-18 Nm)
Lower Track
Cover Bracket
continued...