Generator Shut-Down Procedure - MULTIQUIP MQ POWER DCA-85SSJU WHISPERWATT Parts And Operation Manual

ENGINE SHUTDOWN
To shutdown the generator, use the following procedure:
1. Switch both the MAIN, GFCI and LOAD circuit breakers
(Figure 62) to the "OFF" position.
Figure 62. Main, GFCI and Load
circuit breakers
2. Set the engine speed switch (Figure 63) to the idle
(low) position.
Figure 63. Engine Speed Switch
3. Let the engine cool by running it for 3-5 minutes with no
load applied.
4. Turn the Auto-Off/Reset-Manual switch from the engine
controller to "OFF/Reset" position (Figure 64).
Figure 64. Off/Manual Auto Switch
5. Remove the load from the UVW terminal strip.
DCA-85SSJU — PARTS AND OPERATION MANUAL— REV. #2 (12/21/01) — PAGE 51
DCA-85SSJU— GENERATOR SHUT DOWN PROCEDURE