Arming Perimeter Only; Using The 3 Stay Key - Honeywell Ademco VISTA-32FB User Manual

Arming Perimeter Only

(With Entry Delay ON)

Using the 3 STAY key

Use this key when you are staying home, but might expect someone to use
the entrance door later.
When armed in STAY mode, the system will sound an alarm if a protected
door or window is opened, but you may otherwise move freely throughout the
premises. Late arrivals can enter through the entrance door without causing
an alarm, but they must disarm the system within the entry delay period or
an alarm will occur.
Close all perimeter windows and doors before arming (see
CHECKING FOR OPEN ZONES section)
1. Enter your security code and press
Enter your security code and press
Enter your security code and press
2.
– 30 –
ARMED ***STAY***
ZONE BYPASSED
STAY
3 .
3 .
3 .
The keypad beeps three times and displays the
armed message.
Note: "ZONE BYPASSED" in this display
simply indicates that some zones of protection
are not armed when using STAY mode.