Wireless Remote Control Key Fob (Tcc800Ms) - Honeywell HS923GPRS User Manual

CONTROLLING YOUR SYSTEM
The tag reader LED lights
Set/Unset status (green):
Fast flashing during the entry/exit delay
Slow flashing when the system is in partial arm mode
Off when the system is unset and after the exit delay
Faults status (red):
On when a fault is present (detailed on the webserver)
Slow flashing in case of tag reader low battery
Off in normal situation
Intrusion status (orange):
On when an intruder alarm occurred when the system was set
This will be reset at the next set action
Technical status (orange):
On when a smoke or carbon monoxide (CO) alarm alert occurs

Wireless Remote Control Key fob (TCC800MS)

Arm or disarm your system from anywhere, even from your car, with just one push of a button. Or you
can partially arm the system from the comfort of your bed.
Security status button
Total arm
Caution
Do not place the key fob in a location where it may be subjected to high temperatures
Be careful not to drop your key fob. Handle it with care otherwise you may damage it, discharge
the battery, or cause a malfunction
Keep the key fob away from moisture, dust and water
SOS/Panic (personal attack) alert
Disarm
Partial arm
7