Crumb Pans; Remote Computer Control - Blodgett MT3870 Installation, Operation & Maintenance Manual

CRUMB PANS

1. Install the crumb pans under each end of the
conveyor.
Figure 18
Installation

REMOTE COMPUTER CONTROL

1. Drill the mounting holes for the cooking com-
puter support base.
2. Mount the support base and cable support
bracket to the wall.
3. Stack the cooking computer(s) on the support
base. Connect the cables at the rear of the
controller.
4. Secure the cables to the cable clamp support
bracket and to the rear of the oven using cable
clamps and screws.
NOTE: DO
clamps. Damage to the wires may oc-
cure causing the computer to fail.
Cooking Computer
Cooking Computer
Support Base
11
Oven Assembly
NOT overtighten the cable
Cable Clamp
Support Bracket
Figure 19