Oven Assembly; Oven Supports And Casters; Return Air Diverters - Blodgett MT3870 Installation, Operation & Maintenance Manual

Installation

Oven Assembly

OVEN SUPPORTS AND CASTERS

1. Bolt the supports to the oven with 3/8-16 hex
head bolts.
NOTE: Install the locking casters on the front
of the oven.
2. Carefully place the oven onto casters. Have
several persons lift the oven off the pallet and
set it onto the casters.
3. Engage the brakes on the front casters.
Figure 3

RETURN AIR DIVERTERS

1. Lift the front end of a diverter and slide the end
clips up and behind the oven's rear wall.
2. Lower the front end and slide the diverter into
place. Be certain that the outer edge of the div-
erter lines up with the cutout in the oven's rear
wall. A stud on the rear wall acts as a stop to
ensure proper alignment.
6
Figure 4
Figure 5