If The Power Goes Out; Conditions, Displays And Sounds - GE Allegro 60-874-95R User Manual

Allegro ge
Hide thumbs Also See for Allegro 60-874-95R:
Table of Contents

Advertisement

Sensor
Number
18
19
20
Note
In the event your system
loses power, you must set
the time (See "Setting the
Time" on page 12.), when
power is restored.
Condition
Alarms
Police
Fire
Chime
Silent
Note
1) If there is both a Fire and Police Alarm the panel will display Alarm + FIRE and then any sensors in alarm, regardless
of sensor type.
2) If no text is associated with the sensor the panel will display just the sensor number.
Panel status
Arming Level 1: Disarmed
Arming Level 2: Doors and
Windows armed
Arming Level 3: Motion Sensors,
doors, & windows armed
No Delay
Entry delay
Exit delay
Waiting for code to disarm
Waiting for code to arm
(Quick Arm is off)
20
Table B5: Sensor Information
Sensor Text

If the Power Goes Out

Your system has a backup battery that keeps your system operational up to 24 hours during a
power failure. An optional feature allows your system to alert the central monitoring station if the
power is off for more than 15 minutes.

Conditions, Displays and Sounds

Your security system uses a variety of different alarm sirens, status beeps, and trouble beeps to
communicate with you. This section describes the different sounds and what they mean. Try to
familiarize yourself with the differences. You will hear sounds each time you tell your security
system to do something, like arm or disarm. Some sounds you will hear only when there is a
problem with the system, like a low battery. There are sounds you will only hear in an emer-
gency. Getting to know your system sounds allows you to react quickly and appropriately to the
messages you hear.
Table B6: Normal Mode
Alarm + POLICE then
Alarm + <sensor name>
Alarm + FIRE then
Alarm + <sensor name>
Alternates,
Current time
Current time + System is OK
Doors and Windows
Motion Sensors, Doors and Windows
No Delay
Enter Code + Entry + Time Remaining in
Entry Delay
EXIT XX (Time Remaining in Exit Delay)
Enter Code + TO DISARM
+ Doors and Windows or
+ Motion Sensors, Doors and Windows
Enter Code + TO ARM
+ Doors and Windows or
+ Motion Sensors, Doors and Windows
Visual Display
Chime On +
current time
Sensor Type
Audible Response
High level on steady tone.
Repeating series of three beeps.
Beeps twice.
None.
One short beep.
Two short beeps.
Three short beeps.
None
1 beep every 4 secs, 1 beep every
sec for last 10 secs.
1 beep every 4 secs, 1 beep every
sec for last 10 secs.
Sensor
Group

Advertisement

Table of Contents
loading

Table of Contents