Download  Print this page

Arming Level 3-doors, Windows, And Motions; Arming Options; Quick Arm; Keychain Touchpad Arming - GE Allegro 60-874-95R User Manual

Allegro ge.
Hide thumbs

Advertisement

Note
If Quick Arm feature is on,
an access code is not
required to arm the system
to Level 2.
Note
See Keychain touchpad
arming section.
Note
If Quick Arm feature is on,
an access code is not
required to arm the system
to Level 3.
Note
See Keychain touchpad
arming section for other

arming options.

To arm to Level 2 using the panel keypad:
1. Close all protected perimeter doors and windows.
2. Press
once. The panel displays
3. Enter your access code. The panel displays EXIT TIME XX and
. The system sounds two beeps.
Windows
4. If leaving the premises, exit through a designated delay door before the delay time expires.
To arm to Level 2 using a keychain touchpad:
Press the
button. The system sounds two beeps.
To arm to Level 2 using a wireless touchpad:
1. Press
Arm Doors and Windows
2. Enter your access code.
Arming Level 3—Doors, Windows, and Motions
At other times, you want every sensor to be alert, such as when the family goes on vacation, or at
business closing time.
In this and similar situations, set your system to Level 3 for maximum protection. All sensors are
active—perimeter door and window sensors and interior motion detectors.
To arm to Level 3 using the panel keypad:
1. Close all perimeter doors and windows.
2. Press
twice. The panel displays,
3. Enter your access code. The panel displays EXIT TIME XX and
. The system sounds three short beeps.
Windows
4. Exit through a designated delay door before the delay time expires.
To arm to Level 3 using a keychain touchpad:
Press the
button twice to go from Level 1 to Level 3, or once to go from Level 2 to Level
3. The system sounds three short beeps.
To arm to Level 3 using a wireless touchpad:
1. Press the
ARM Motion Sensors
2. Enter your access code.
Arming Options

Quick Arm

The Quick Arm option lets you arm your system without using an access code. You will still need
to enter an access code to disarm the system. The dealer/installer can turn this feature on or off
for you. See Table B4: System Options, on page 19, to see if this feature is available to you.
To arm to Level 2 with Quick Arm enabled:
Press
button once.
To arm to Level 3 with Quick Arm enabled:
Press
button twice.

Keychain Touchpad Arming

Your installer can set up your keychain touchpad to arm the system in one of two
ways:
1. Press
to arm the system directly to Level 3 with no delay. Using this method, you would
not be able to arm to Level 2 with your keychain touchpad.
OR
.
Enter Code TO ARM
button.
Enter Code TO ARM
button.
Doors and
.
Motion Sensors, Doors and
7

Advertisement

   Also See for GE Allegro 60-874-95R

Comments to this Manuals

Symbols: 0
Latest comments: