Radio Frequency (Rf) Settings; Setting The Transmitter Rf Power - Shure QLX-D Series User Manual

Matching Audio Levels with Mic Offset
When linking two transmitters to a receiver, there may be a difference in volume levels between microphones or instruments. If
this occurs, use the Mic Offset function to match the audio levels and eliminate audible volume differences between transmit­
ters. If using a single transmitter, set Mic Offset to 0 dB.
1. Turn on the first transmitter and perform a sound check to test the audio level. Turn off the transmitter when finished.
2. Turn on the second transmitter and perform a sound check to test the audio level.
3. If there is an audible difference in the sound level between the transmitters, navigate to the Mic Offset menu on the
transmitter to increase or decrease the Mic Offset in realtime to match the audio levels.

Radio Frequency (RF) Settings

Setting the Transmitter RF Power

The transmitter offers two RF power settings which determine the transmitter range.
• Lo = 1 mW
• Hi = 10 mW
Use the Lo setting when the transmitter and receiver are in close proximity.
1. Navigate to the transmitter rf power menu.
2. Use the arrow buttons to select Hi or Lo.
3. Press enter to save.
Shure Incorporated
31/60