This chapter describes the maintenance mode which is exclusively designed for the purpose of
checks, settings and adjustments using the keys on the control panel.
You can customize the EEPROM according to the shipment destination of the machine
concerned. In addition, you can perform operational checks of the LCD, control panel PCB or
sensors, perform a print test, display the log information or error codes, and modify firmware
switches (WSW).
8.1
8.2
8.3
8.4
8.4.1
8.4.2
8.4.3
ADF Performance Test (Function mode 08) ........................................................8-8
8.4.4
8.4.5
8.4.5.1
Firmware switch setting (Function mode 10) .............................................8-10
8.4.5.2
Printout of firmware switch data (Function mode 11).................................8-12
8.4.6
Operation Check of LCD (Function mode 12)....................................................8-13
8.4.7
Operational Check of Control Panel PCB (Function mode 13) ..........................8-14
8.4.8
8.4.9
Sensor Operational Check (Function mode 32).................................................8-16
(Function mode 55) ............................................................................................8-21
8.4.13 Continuous print Test (Function mode 67).........................................................8-21
8.4.16 Machine Error Code Indication (Function mode 82) ..........................................8-25
8.4.17 Output of Transmission Log to the Telephone Line (Function mode 87)...........8-25
CHAPTER 8 MAINTENANCE MODE
CONTENTS
Confidential