Paper Eject; Drum Unit - Brother FAX-2820 Service Manual

3.2.4.4

Paper eject

After the printing image on the exposure drum is transferred onto the paper, the paper is fed to the
fixing unit to fix unfixed toner onto the paper.
Afterwards, the paper is ejected from the fixing unit by the heat roller and the pressure roller in the
fixing unit. The paper eject actuator detects whether the paper is ejected correctly or not.
After the paper exits from the heat roller, the paper is turned by the back cover and ejected face
down into the top output tray through the eject roller ASSY.
Back cover
3.2.4.5

Drum unit

Exposure drum
Generates the latent electrostatic image and develops the image on the drum surface.
Primary charger
Forms a uniform charge on the drum surface.
(1) Corona wire
Generates the ion charge on the drum.
(2) Grid
Spreads the ion charge evenly over the drum surface.
Transfer roller
Transfers the toner image to the paper from the drum surface.
Cleaner
Removes the paper dust or dirt on the surface of the exposure drum.
Eject roller ASSY
Paper eject actuator
3 - 9 Confidential