Brother FAX-2820 Service Manual page 112

NOTE: When re-assembling the halogen heater, put the halogen heater onto the fuser frame so
that the terminal of the heater harness is at the top, and secure the screws in the order
shown in the figure below.
Halogen heater
1
(10) Remove the HR gear.
(11) Remove the two HR bush.
HR bush
HR gear
Heater harness
Heat roller
Hooks
Return the hook to the
original position.
5 -4 3
Fuser frame
HR gear
2
HR bush
Return the hook to the
original position.
Confidential