Scan Using Presto! Pagemanager - Brother ADS-2000 User Manual

Scan Using Presto! PageManager

Scan Using Presto! PageManager
1
Start Presto! PageManager by double-clicking the Presto! PageManager icon on your computer screen.
Note
The first time you use the Brother TWAIN driver, you need to set it as the default driver. To set the Brother
TWAIN driver as the default driver, do the following.
(1)
Select Select Source in the File menu.
(2)
Select Brother TWAIN, then click Select.
2
Select Acquire Image Data in the File menu.
The scanner setup dialog box will appear.
3
Adjust the settings in the scanner setup dialog box if needed (Resolution, Scan Type, Adjust Image).
4
From the Document Size drop-down list, select your document size.
Note
After you select a document size, you can adjust the scanning area further by clicking the left mouse button
and dragging it. This is required when cropping an image for scanning.
5
Click the Start button.
The machine starts scanning.
file:///C|/Documents%20and%20Settings/mcampbell.AM/My%20Documents/ADS2000solutions/chapter3_10_2.html[3/11/2013 10:25:56 AM]
Page Top