Replace The Pick-Up Roller - Brother ADS-2000 User Manual

Replace the Pick-up Roller

Replace the Pick-up Roller
Your machine is equipped with a scan counter. The counter automatically counts how many times the machine has
scanned. When the machine scans 50,000 times, the machine will display a message on the Status Monitor to remind
you to replace the Pick-up Roller.
1
Open the Top Cover (1) and the Front Cover (2).
2
Hold the both sides of the Pick-up Roller Cover (1) and then pull the cover down.
3
Slide the Pick-up Roller (1) all the way to the right.
4
The holder of the Pick-up Roller has a narrow opening, and the shape of the shaft of the Pick-up Roller matches
this opening. Rotate the Pick-up Roller until you can fit the shaft into the opening of the holder.
file:///C|/Documents%20and%20Settings/mcampbell.AM/My%20Documents/ADS2000solutions/chapter6_3_5.html[3/11/2013 10:24:06 AM]