Brother ADS-2000 User Manual page 59

Change Scan to PC Settings
Duplex(two-
sided) Scanning
Default
Carrier Sheet
Mode
Plastic Card
Mode
file:///C|/Documents%20and%20Settings/mcampbell.AM/My%20Documents/ADS2000solutions/chapter4_2_19.html[3/11/2013 10:23:42 AM]
setting Scan Type to Auto, Gray (Error
Diffusion), True Gray or 24bit Color.
If you check this box, the machine scans both sides of
the document. When using the automatic 2-sided
(duplex) scan feature, you must select Long-edge
binding or Short-edge binding depending on the
layout of your original to make sure that the data file
created appears correctly in the scanned document.
Note
The 2-sided (duplex) scanning feature is available
with lengths up to Legal size.
Restore all settings to their factory default values.
You can scan the following documents using the
Carrier Sheet. For this mode, you can select any
setting other than Auto from the Document Size drop-
down list.
• Large-sized Documents (A3, B4 and Ledger)
Fold the document in half and insert it in the Carrier
Sheet for 2-sided (duplex) scanning, then both front
and back pages will be combined into a single page.
• Important documents (photos, contracts)
• Thin paper (receipts)
• Irregular-shaped paper (clippings)
Note
• Load only one Carrier Sheet at a time.
• Set the document in the center of the Carrier
Sheet and align the top of the document with the
top of the Carrier Sheet.
Lets you scan non-embossed cards, such as driver's
licenses or insurance cards, using these automatic
settings:
• Resolution: 600 x 600 dpi
• Document Size: 2 in 1 (Business Card)
• Duplex(two-sided) Scanning: On (Short-edge
binding)
• Auto Deskew: Off
• Multifeed Detection: Off
• Automatic Image Rotation: Off
Yes Yes Yes
Yes Yes Yes
Yes Yes Yes
Yes Yes Yes
Yes
Yes
Yes
Yes