Brother ADS-2000 User Manual page 76

Clean the Scanner
Note
In addition to cleaning the glass strips with a non-flammable glass cleaner, run your fingertip over the glass to see
if you can feel anything on it. If you feel dirt or debris, clean the glass again concentrating on that area. You may
need to repeat the cleaning process three or four times. To test, scan a document after each cleaning attempt.
file:///C|/Documents%20and%20Settings/mcampbell.AM/My%20Documents/ADS2000solutions/chapter6_2.html[3/11/2013 10:23:46 AM]
When there is a spot of dirt or
correction fluid on the glass
strip the scanned sample shows
a vertical line.
After the glass strip is cleaned
the vertical line is gone.
Page Top