Brother ADS-2000 User Manual page 85

Control Panel Overview
file:///C|/Documents%20and%20Settings/mcampbell.AM/My%20Documents/ADS2000solutions/chapter1_3.html[3/11/2013 10:23:49 AM]
• See
Custom Scan Settings
and follow the steps.
• See Change Scan Settings
®
(Windows ) and follow the steps.
• See Change Scan Settings
steps.
• See
Change Scan to PC Settings
and follow the steps.
• See Change Scan Settings
follow the steps.
Out of Memory
The machine's memory is full and the machine cannot scan the entire document. Do
one of the following:
• Press any key.
• Turn the machine off and then on by unplugging the machine from the AC power
outlet and then plugging the machine in again.
Unusable Device
Disconnect any unusable devices, such as a fan, from the USB port. Turn the machine
off and then on by unplugging the machine from the AC power outlet and then
plugging the machine in again.
Multifeed Detection
Multiple documents have fed at the same time. Press Stop (see Multifeed) and then
do the following:
• Uncheck the Multifeed Detection check box when scanning business cards.
• Check the Plastic Card Mode check box when scanning a plastic card.
• Check the Carrier Sheet Mode check box when scanning using the Carrier Sheet.
To change the settings, do one of the following:
• See
Custom Scan Settings
and follow the steps.
• See Change Scan Settings
®
(Windows ) and follow the steps.
• See Change Scan Settings
to scan using ControlCenter4 Home Mode (Windows
to scan using ControlCenter4 Advanced Mode
to scan using ControlCenter2 (Macintosh) and follow the
to scan using the Scan to PC key (Windows
to scan using the Scan to PC key (Macintosh) and
to scan using ControlCenter4 Home Mode (Windows
to scan using ControlCenter4 Advanced Mode
to scan using ControlCenter2 (Macintosh) and follow the
®
)
®
)
®
)