INSTALLATION
D o u b l e O v e n s
S i d e o p e n i n g d o o r o v e n s
H a r d W i r i n g D e t a i l
1. Remove terminal cover plate from rear
panel of appliance.
2. Fit wires through hole in cover plate
and make connections to terminals.
3. Engage wires into plastic clip. Secure
plastic clip with two long silver screws
(supplied in separate bag).
4. Replace cover plate onto rear panel.
NOTE: Double oven (Model PDN794).
This product is supplied with two optional
termination points. Only one termination
point is required to be connected.
A
B
C
FLUSH FIT
600
1086
581
565
1078
560
PROUD FIT
USE 25mm BLACK
INSTALLATION SCREWS
(AS SUPPLIED)
USE 15mm BLACK
INSTALLATION SCREWS
(AS SUPPLIED)
Plastic clips
Plastic clip
securing points.
31