Before Operating Your Appliance For The First Time; Setting The Time; Preparing Your Appliance For The First Time; Installing Your Oven Furniture - Westinghouse PON663 Owner's Manual

BEFORE OPERATING YOUR APPLIANCE FOR THE FIRST TIME

S e t t i n g t h e t i m e
If you have purchased a model fitted with an electronic or programmable timer, you must set
the time of day before you can operate your appliance.
3 Button Electronic Clock
• After the appliance has been electrically connected "12.00"
will be displayed and the "clock indicator" will flash.
• To set the time of day, press the – or + buttons. 5 seconds
after the last change, the "clock indicator" will disappear,
confirming the time has been set.
• Note: The clock has a 24-hour display.
KRONOS 2 Programmable Controller
• After the appliance has been electrically connected, the set
clock symbol
display.
• To set the time of day, press the
after the last change the timer arrow
confirming the time has been set. Once the time has been
entered, the clock advances minute by minute.
• NOTE: The clock has a 24-hour display.
P r e p a r i n g y o u r a p p l i a n c e f o r t h e f i r s t t i m e
• Please remove all internal boxes and bags from the oven before operation.
• Please wipe out the oven interior prior to operation with warm soapy water and polish
dry with a soft clean cloth. Do not close the oven door until the oven is completely dry.
• New appliances can have an odour during first operation. It is recommended to 'run
in' your oven before you cook for the first time. Run the oven at 180ºC for 2-4 hours
and ensure that the room is well ventilated.
• If your appliance is fitted with a 2-hour "Auto Off" timer, make sure it is set to the 'O' marker for
manual operation. See image.

Installing your oven furniture

The type of oven furniture you receive is dependant on the model you have purchased.
1. Catalytic liners (on selected models)
Catalytic self clean panels are coated with a specially
formulated enamel coating. This porous coating enables
the "self cleaning" process - see page 25 for more details.
Catalytic liners must be installed first but you can omit
them, if you wish, with no effect to cooking
performance. Their sole purpose is to make oven
cleaning easier.
• The catalytic liners will attach to each side of your
oven. There will be a left hand and right hand version.
This is marked on the panel.
• Position the first liner as per the diagram. The black,
shiny side of the liner should be facing the oven wall,
the hooks pointing down and the word 'LH' positioned to the
top rear portion of the oven. The right hand side will be a
mirror image of this.
• Line the hooks up with the slots provided in the oven wall,
push them in and then allow the liner to slide down to its final
position.
• The access hole for the side racks should be visible when the
liner is correctly positioned - see diagram.
6
and timer arrow will flash on the clock
or
cook time
end time
buttons. 5 seconds
will disappear,
timer
clock
+
— MODE