Pon783 Programmable Controller - Westinghouse PON663 Owner's Manual

OPERATING THE PROGRAMMABLE CLOCK (Continued)
To check or cancel settings
1. To check your settings, press the mode button until the setting you want is displayed. A red
light will flash next to the mode (cook time, end time etc) that is currently on display.
2. To cancel "delayed start" press the mode button until a light flashes next to "end time". Press
and hold the – button until the clock no longer reverses (you will hear a beep). If you have left
the temperature and function knobs at a setting the oven will start once the "end time" light
stops flashing.
3. To cancel "auto shut off" press the mode button until a light flashes next to "cook time". Press
and hold the – button until the clock no longer reverses at ("0:00" and you will hear a beep).
This automatically cancels "delayed start". If you have left the temperature and function knobs
at a setting, the oven will start once the "cook time" light stops flashing. Because you have
cancelled "auto off" the oven will continue to heat until you manually turn it off.
On completion of cooking
The oven will turn off, the timer will beep and the "end time" and/or "cook time" indicators will
flash.
1. Turn the function and temperature controls to the off position.
2. Press any button to stop the timer from beeping.
Switching the clock display ON and OFF
1. Press any two buttons together for 2 seconds to switch 'off' the display.
2. Press any button to switch the clock display 'on' again.
Note: If a timer mode is set, then it is not possible to switch the display off.
Model PON783 programmable controller
Setting the time of day
After the appliance has been electrically connected the "set clock" symbol
arrow will flash on the clock display.
1. To set the time of day in hours and minutes press the
the last change the "timer arrow"
NOTE: The clock has a 24-hour display.
Setting the oven function
1. Switch on the appliance by pressing the "On / Off" button. The oven lights will light.
2. Press the "Function" button as many times as necessary until the desired function appears.
The suggested cooking temperature appears in the display and the degrees symbol "°"
flashes. If the suggested temperature is not changed within approximately 5 seconds the
degrees symbol "°" stops flashing and the oven begins to heat. The suggested
temperature display is replaced with the oven centre temperature and a thermometer
icon. The thermometer icon rises slowly, indicating the degree to which the oven is
currently being heated.
Changing the oven temperature
1. Press the or button, to decrease or increase the temperature.
NOTE: The temperature can only be adjusted when the degrees symbol "°" is flashing.
The temperature setting changes in increments of 5°C. To change the temperature after
the degrees symbol "°" stops flashing, press the "Function" button and then press the
or buttons to change the temperature.
Setting the cooking time
1. Select the desired oven function and cooking temperature.
2. Press the "Timer" button as often as necessary, until the "cook time"
3. Set the desired cooking time by using the
flashing. After 5 seconds from the last time adjustment the "timer arrow"
and your appliance is now programmed.
4. When the set time has elapsed, a signal will sound. To stop the signal, press any of the buttons.
will disappear, confirming the time has been set.
or buttons, whilst the "timer arrow"
and "timer
or buttons. 5 seconds after
symbol appears.
will disappear
is
15