Table of Contents
Advertisement
SIDE BURNER LIGHTING
Push and turn the side burner control knob to the "HIGH"
position and immediately press and hold the electronic
igniter button. You'll hear a snapping sound. It may be
necessary to hold the electronic starter button for about
4 seconds. If the burner does not light in 4 seconds, turn
the knob to the "OFF" position and wait 5 minutes before
trying again. Repeat above steps to light remaining
burners. (See Fig. 63)
MATCH LIGHTING OF THE BURNER
If by chance the electronic igniter does not light the burn-
er, the burner may be lit with a match. Keep your face as
far away from the burner as possible and place a lit, long
stem match through the spaces in the grate to the ports
of the burner. Position the match near the burner ports
and push and turn the control knob to the "HIGH" position.
(See Fig. 64)
Using the Sideburner
Fig. 63
Fig. 64
22
Advertisement
Table of Contents
