Amana SS 4 Use And Care Manual page 11

Burner gas grill
Hide thumbs Also See for SS 4:
Table of Contents

Advertisement

SHELF HANDLE ASSEMBLY
1. Lay the left shelf on its side with the shelf hooks facing
up. Attach one of the handle ends to the front of the
shelf using the supplied phillips head screw.
(See Fig. 25)
2. Set the handle bar into the second handle end and
then press into the previously installed handle end.
(See Fig. 26)
3. Attach the second handle end while holding the
assembly in place using the supplied phillips head
screw. (See Fig. 27)
LEFT SHELF ASSEMBLY
1. Place a piece of styrofoam from the packaging
inside the grill to leave the grill hood propped open
slightly. (See Fig. 28)
2. Attach the left shelf by inserting the four shelf hooks
into the slots on the side of the grill. (See Fig. 28)
3. After inserting the four shelf hooks, press the shelf
against the grill and press downward until the shelf
locks in place. Make sure the top trim strip is hang-
ing all the way inside of the grill before pressing
downward. (See Fig. 29)
4. Install one self tapping screw into the bottom front
hole of the shelf to lock the shelf in place.
(See Fig. 30)
Fig. 29
Fig. 30
Assembly
9
Fig 25
Fig 26
Fig. 27
Fig. 28
Styrofoam Under Hood
Top Trim Strip

Advertisement

Table of Contents
loading

Table of Contents