Table of Contents
Advertisement
ATTACHING THE HOSE AND REGULATOR
ASSEMBLY
1. Feed the longer hose of the dual hose and regulator
assembly through the grommeted hole in the right
side of the cart. (See Fig. 47)
2. Attach the fitting to the side burner valve and tight-
en securely with a wrench. (See Fig. 48)
3. Attach the remaining shorter hose to the main inlet
fitting on the bottom of the grill and tighten securely
with a wrench. (See Fig. 49)
ATTACHING CONDIMENT BASKET AND TOOL
HANGERS
1. Slide the condiment basket into the slots located
inside of the left hand cart door. (See Fig. 50)
2. Slide the "S" hook tool hangers onto the utensil
hanger located on the left shelf. (See Fig. 51)
Fig. 51
Assembly
14
Fig. 47
Fig. 48
Fig. 49
Fig. 50
Advertisement
Table of Contents
