Table of Contents
Advertisement
10. Place the cart back onto the two (2) rear wheel
channel bolts. (See Fig. 10)
11. It twill be necessary to push the top of the left
and right sides outward slightly to get the cart
back down completely on the base. (See Fig. 11)
12. Press the sides back together making sure that
the side flanges cover the cart back flange.
(See Fig. 12)
13. Attach three (3) self tapping screws through the
left cart side into the cart back. Repeat for right
cart side. (See Fig. 13)
14. Fasten two (2) nuts onto the back wheel channel
bolts. (See Fig. 14)
15. Tighten all six (6) wheel channel nuts with a
wrench. (See Fig. 15)
Fig. 14
Fig. 15
Assembly
6
Fig. 10
Fig. 11
Fig. 12
Fig. 13
Large Flange With
Holes On Bottom
Advertisement
Table of Contents
