Table of Contents
Advertisement
1. SAFETY PRECAUTIONS
1.
*
Otherwise, there is a danger of fire.
*
Otherwise, there is a danger of fire.
*
from welding, iron refuse, wire, dust, etc.
Otherwise, there is a danger of fire.
Be sure to install it in a place which can bear the weight according to
*
the specifications in the text (4. Installation).
Otherwise, it may fall and there is a danger of injury.
Be sure to install the unit on a perpendicular wall which is not subject
*
to vibration.
Otherwise, it may fall and there is a danger of injury.
Be sure not to install and operate an inverter which is damaged or parts
*
of which are missing.
Otherwise, there is a danger of injury.
Be sure to install it in a room which is not exposed to direct sunlight
*
and is well ventilated. Avoid environments which tend to be high in
temperature, high in humidity or to have dew condensation, as well as
places with dust, corrosive gas, explosive gas, inflammable gas,
grinding-fluid mist, salt damage, etc.
Otherwise, there is a danger of fire.
Be sure that the wall surface is a nonflammable material, such as steel
*
plate.
2.
*
Otherwise, there is a danger of electric shock and/or fire.
Wiring work shall be carried out by electrical experts.
*
Otherwise, there is a danger of electric shock and/or fire.
Implement wiring after checking that the power supply is off.
*
It might incur electric shock and/or fire.
After installing the main body, carry out wiring.
*
Otherwise, there is a danger of electric shock and/or injury.
Wait until DC bus voltage is discharged after power supply is turned
*
off.
Otherwise, there is a danger of electric shock.
CAUTION
WARNING
1-1
............ p. 4-1
...........
p. 4-1
...........
p. 4-1
...........
p. 4-1
...........
p. 4-1
...........
p. 4-1
...........
p. 4-1
...........
p. 4-2
............ p. 5-1
............ p. 5-1
............ p. 5-1
............ p. 5-1
............ p. 5-10
Advertisement
Table of Contents
Troubleshooting
