Hitachi J300U Series Instruction Manual page 110

12.7 Copy Unit Function
Operation example (Procedure to transfer the data of inverter A to B,C, and D inverters)
Se-
quence
Set data is read out from the
1 inverter A (It is stored into the
memory.
Turn off the power supply to
2
inverter A and remove the cable.
Connect the cable to inverter B and
3
turn on the power.
Copy data stored in the copy unit is
4
written to inverter B.
Cut off the power supply to inverter
5
B.
(* 1)
Perform the above processes from 3
to 5 sequentially for inverters C and
6
D. That is, the same process as at
for inverter B.
Operation example (Process to change and transfer to inverters B, C and D)
Connect the cable and press
the remote key.
1
Change the data of the inverter
with copy unit.
Read out the data from
inverter A (It is stored into the
memory area of the copy unit).
2 to 6
The following procedures are the
same those of the operation 1.
Operation Key
READ
COPY
Copy
unit
MON FUN STR
2
1
READ
Inverter A
12-19
Operation result
Inverter A Copy unit
Data copy
Inverter B Inverter C
Data change
Copy unit
Copy unit
Inverter D
Inverter A