Hitachi J300U Series Instruction Manual page 129

2. Commercial power source switching
Function code
Extension
function code
NOTE: Allocate the commercial power source switching input terminal CS to one of the input terminal settings
1 to 8 ( C
Monitor mode
Function mode F-34
NOTE: Allocate the commercial power source switching input terminal CS to one of the input terminal settings 1
to 8 (IN-TM1 to IN-TM8). In this example, the terminal CS is allocated to the input terminal setting 3.
Data set for commercial power source switching
Set value
F 9
03
Function name
C 3
Input terminal setting 3
0 to C 7 ). In this example, the terminal CS is allocated to the input terminal setting 3.
F-SET-SELECT
F/R-SELECT TRM
IN-TM3
Run command to Frequency command to
Terminal Terminal
Terminal rating plate Set value
3
TRM
Set TRM (terminal mode).
Select the CS terminal.
CS
A-17
Set the terminal mode.
Select the CS terminal.
14