Tools
Tools > Tools
DDNS
DDNS Force Update:
DDNS Status:
Modem
Reset Modem:
Tools > Firmware Upgrade
Firmware Upgrade
Use this page to update router firmware. Go to
Note:
Before you upgrade your firmware, save your present configuration. After upgrading firmware, verify
your configuration to ensure that it is as expected. Verify that the DHCP scope settings are correct.
Up to four IPSEC tunnels can be active at any given time. Additional tunnels can saved, but will not be
active.
Browse File for Upgrade:
Multi-Tech Systems, Inc. MultiModem rCell User Guide
Click Update to update the DDNS server with your current dynamically assigned IP
address.
Click Refresh to display the DDNS Status after a forced update.
Click Reset to reset the integrated cellular modem.
multitech.com/support.go
Click Browse and locate the latest firmware version to be downloaded. Select the
mtcba-EN3-u-xxx.bin file. Highlight the file name and press Enter so that the file name
displays in the text box. Make sure you select the correct BIN file; otherwise, your
router can become inoperable. Then click Upgrade.
Chapter 3 – Using the Web Management Software
to check for firmware updates.
49
Need help?
Do you have a question about the MultiModem rCell and is the answer not in the manual?