Wizard Setup - Multitech MultiModem rCell User Manual

Chapter 2 – Installation
The Wizard Setup screen displays.

Wizard Setup

A minimum router configuration is provided using the Wizard Setup. This provides a quick way to enter and save
information needed to create a connection to the Internet. The table below provides the information for the
minimum configuration.
IP Configuration
IP Address
Mask
DNS
PPP Configuration
PPP
Dial-on-
Demand
Idle Time Out
Dial Number
APN
Init String
16
The default is 192.168.2.1. To change it, simply enter your own IP address.
The default is 255.255.255.0
Enter the primary DNS IP address for the system. The default is 0.0.0.0
The default is disable. To connect to the Internet, you need to enable PPP.
Depending on the model, commands may need to be issued to the integrated
The default is disable.
Sets the amount of time the PPP link stays active before disconnecting. Setting
Enter the dial number. This number connects you to the Internet.
For HSPA, the number is *99***1#.
For HSPA models, enter the APN (Access Point Name). The APN is assigned by
You can set up to 4 router initialization strings.
cellular modem before connecting to the wireless
service. To issue commands to the integrated
cellular modem, PPP must be disabled and telnet
port 5000 used.
the value to zero causes the link to stay active
continuously.
your wireless service provider.
Multi-Tech Systems, Inc. MultiModem rCell User Guide